iM3 SP6, Инструкция по использованию и техническое описание

Страница: 18 / 118

- 16 -
2. Attach the prophy angle to the straight hand piece by following the steps below:
A) Unlock the prophy angle from the straight hand piece by turning the locking ring clockwise.
This should open the lock. Note: When you first unpack the straight hand piece, there
may be a metal rod at the top that serves as a placeholder. Remove the rod after you open
the lock.
(Figure 4)
B) Match the groove at the base of the prophy head with the top of the straight hand piece and
connect them together.
(Figure 5)
C) Close the lock by turning the locking ring counter-clockwise. The prophy head should now
be locked onto the straight hand piece and should not fall off during operation.
(Figure 6)
D) If you wish to remove the prophy head, follow step A to release the lock on the prophy head.