Im-en Export Frijters Rijsbergen B.V LaserOP 3.0, Инструкция по эксплуатации

Страница: 9 / 16

4 USE AND OPERATION
9
4.1 INSERTINg THE BATTERIES
4.2 POWERINg UP THE LASEROP
Only trained and “internally certifi ed/authorised” operators are allowed to
use this device in a professional environment.
NEVER allow yourself to be distracted when you are operating the device.
Ensure the light source of the LaserOp is clean at all time.
ALWAYS remove the batteries BEFORE cleaning the lens. Ensure to NEV-
ER look straight into the light source of an active laser, as this might lead to
irreversible eye damage!
Do not operate the LaserOp if people are or could be within the reach of
the laser beam.
1. Power up the LaserOp with the ON/OFF key switch located in
the middle of the end cap.
2. Next, push the main switch, the
control light turns on.
3. As soon as the main switch is
released, the device turns off.
> The LaserOp may need to warm
up from 10 to 30 seconds before
delivering the brightest beam.
4. The adjustment knob at the front of the lens allows you to narrow
down the beam or to widen it instead.
getting started:
Ensure the batteries are fully loaded at 3.7 volts, as supplied.
1. Turn the end cap to the left and
remove it.
2. Insert or replace the batteries
with the positive (+) side pointing
outwards in the battery compartment.
3. Screw the end cap back onto the
LaserOp; the device is now ready
for use.