Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
1. INTRODUCTION
The Athena series duplicator is a stand-alone CD/DVD Disc Duplicator Controller that provides support for up to 7
CD/DVD discs. There are 8 IDE ports on the controller and each IDE port is independent from one another. Therefore,
the controller can control several CD/DVD devices at the same time. The drives do not have to be of the same brand
or speed. The controller can support up to 7 discs duplicating simultaneously at maximum 56x CD writing and 16X
DVD writing speeds
The easy-to-use operating control panel consists of a LCD screen and 4 buttons. All operating messages and
information, such as the function list, instructions, operating status, or error message(s), will display in real time on the
screen.
The built-in Hard Drive will allow users to load many CD/DVD Master Source Discs onto the HDD as source disc
images. Loading a disc image onto the HDD will reduce the risk of damaging the Source Disc due to heavy duplicating
jobs. An intelligent and dynamic HDD management system will dynamically assign HDD partitions to each CD/DVD
disc image loaded onto the HDD according to their actual capacity requirement. This smart HDD manager will ensure
a flexible and efficient HDD management.
2. FEATURES:
1 to 7 IDE-to-IDE CD\DVD Disc Duplicator Controller
Auto-detect IDE devices.
2x16 LCD display and 4 control buttons.
Supports up to max 56x CD duplication, 8x / 16x DVD duplication
Flexibility in setting different duplication speeds based on various Disc writers.
It is easy to
select any Drive as the Master Reading Source
.
Support for an
IDE Hard Drive Device. You can l
oad master source CD or DVD discs onto the Hard Drive as a
disc images
.
Support for
Audio Track editing
. Combine your favorite audio tracks into one customized CD.
Special
Pre-Scan
feature can evaluate the master source disc before copying.
Support for copying simulation to prevent any failures caused by bad blank discs or bad source discs.
Support for a Verification function to ensure copied disc’s readability
Supports all major disc types
Auto detect source disc
Can set button beep on or off
Firmware is easily updateable. Just place an update CD in any drive and within a few seconds, the firmware is
quickly updated.
