ILX Lightwave OMH-6727B, Руководство пользователя

Страница: 30 / 38

C O M M A N D R E F E R E N C E
Error Messages
16
OMH-6727B
C H A P T E R
3
Error Messages
Error messages may appear on the right display. In remote operation, the current
error list can be read by issuing the
ERR? query. When this is done, a string is
returned containing the previously unread error messages (up to ten). When the
error queue is active, bit #7 of the Status Byte is also set to one.
Appendix A of the OMM-6810B Instruction Manual contains an explanation of the
error messages which may be reported by the 6810B on the display or via remote
operation.
Programming Examples
Examples of programming the 6810B via GPIB are shown in the 6810B
Instruction Manual, Chapter 4.
Command Name # Parameters
Expected
Description
BRIght 1 Sets the brightness of the front panel
BRIght? None Returns the level of the display brightness
CAL: POWERSET 2 Sets the user calibration power
CAL: RECall None Resets the user calibration
CAL:USER None Starts the user calibration
COND? None Returns the condition status register
ENAB:COND 1 Sets the enable register for conditions
ENAB:COND? None Returns the condition enable register
ENAB:EVENT 1 Sets the enable register for events
ENAB:EVENT? None Returns the event enable register
ERRors? None Returns errors generated since last ERR?
EVEnt? None Returns the event status register
HEAD:IDN? None Returns the head identification string
HOLD? None Returns the hold status
POWer? None Returns the power measurement
POWer:AUTO 1 Sets the power autoranging mode on or off
POWer:AUTO? None Returns the status of power autoranging
POWer:MODE 2 Sets the power display units
POWer:MODE? None Returns the power display units
POWer:OFFSET 1 Sets the power offset multiplier
POWer:OFFSET? None Returns the power offset multiplier