ILX Lightwave OMH-6727B, Руководство пользователя

Страница: 21 / 38

O P E R A T I O N
Front Panel Controls
4_03 OMH-6727B
7
C H A P T E R
2
Unused Functions
The Multimeter function that is not utilized (disabled) when
the OMH-6727B is attached are shown to the right. If a
disabled button is pushed, the 6810B will display the error
code E-715.
All other switch functions perform as described in the OMM-6810B Instruction
Manual.
Error Display
Execution errors are indicated on the right display. Errors are shown as "E-xxx"
where xxx is a three digit number representing the unique error. Errors are
displayed for three seconds or until the error causing condition is remedied,
whichever is longer. See Appendix A in the OMM-6810B Instruction Manual for a
detailed list of error messages.
Rear Panel Connections
The OMH-6727B interfaces with the rear panel of the multimeter as described in
the following paragraphs.
Input Connector
The OMH-6727B interfaces the main unit via the 26-pin high density “D”
connector located on the lower left side of the rear panel. Do not attach or remove
the head while power is applied to the Optical Multimeter. Please turn the power
switch off when changing heads.
Figure 2.2 Rear Panel Input
INPUT