24
EN
Built-in vacuum drawer
42/2018 cod. EI33960040000EN
VM615
After use
• Switch off the machine by pressing
for 2”.
• Clean and dry the packaging machine and the accessories used.
• When the tray is completely dry, close the lid.
• Close the drawer.
Cleaning and maintenance
• For cleaning, do not use stainless steel sponges, scrapers, abrasive, acid or aggressive materials
which could irreversibly damage the surfaces.
• Use a soft cloth and a mild detergent.
• Switch off the machine by pressing
for 2”.
External cleaning
• For steel parts it is advisable to clean by following the direction of the satin finish.
• For the lid and the controls front, use a soft, clean and damp cloth.
Cleaning the tray
1)
Wait until the sealing bar has cooled down
2)
Remove the sealing bar by pulling it upwards
3)
Avoid cleaning the intake opening with water. The water if aspirated could result in damage to
the packaging machine.
4)
Remove any dirt with a soft cloth moistened with warm water. If required, use a neutral disinfectant.
5)
Dry with a soft cloth.
Cleaning the sealing bar
1)
Wait until the sealing bar has cooled down.
2)
Remove the sealing bar by pulling it upwards.
3)
Clean with a soft cloth moistened with warm water.
4)
Dry thoroughly before using the packaging machine.
External vacuum adapter cleaning
1)
Use hot water and detergent for dishes.
2)
Rinse thoroughly.
3)
Dry with a clean cloth.
4)
Reuse the adapter when it is completely dry.
After use / Cleaning and maintenance / Drying cycle
Содержание VM615
Страница 2: ......
