18
CAUTION: Ensure that all the control knobs are in the ‘OFF’ position and the cooker has fully cooled down
before cleaning the oven and cooktop surfaces.
Self-cleaning panels
(in selected models only)
If the oven is equipped with self-cleaning catalytic panels, at normal cooking temperatures (220°C) the catalytic
enamel reduces fat splashes to powder. This powder may be removed with a damp cloth once the oven has co-
oled. In this way the enamel surface remains porous and ensures maximum yield of the panels.
Fat-Filter
(in selected models only)
It is recommended that the fat f lter is cleaned regularly as a build up of grease could damage the thermostat
and the fan motor.
WARNING
Aluminium foil must not be used to cover any inside parts of the oven. This can affect the output of
the appliance together with the enamelled surfaces.
Fig. 18
Removal of oven shelf support
Fig. 19
Removal of fat-filter
(F)
F
Fig. 20
Removal of oven lamp
CLEANING AND CARE
In case of breakdown
In case your appliance is not working correctly, di scon nect it from the mains and call the After Sales Service.
In case oven light is not working properly, di scon nect the appliance from the mains, re mo ve the prot ec tion glass
of the lamp and replace it. Take care that lamp must be suitable for working at high temperatures and has the
proper technical fea tu res.
Should turning the gas thermostat become dif
f cult, you will need technical assistance to either replace it or
lubricate it.
Cleaning the grills
We advise always cleaning the pan support grills after cooking. Wait until they have cooled down and then cle-
an them with a NON ACID detergent. Acid substances such as lemon juice or other acid detergents ma
y cause
irremediable damage to the enamel on the grills. Dry the grills carefully with a cloth immediately after washing
them. Washing in the dishwasher not recommended.
Maintenance Sch
edule
No regular maintenance is required except cleaning.
