ILVE ILFRZ217/2, Подробное руководство по установке и эксплуатации

Страница: 22 / 28

22
Rev.13052022
TROUBLESHOOTING
ILREF316/2
IF THE APPLIANCE IS NOT WORKING, YOU SHOULD CHECK:
• That there is power to the appliance.
• The house fuses are intact and the fuse in the plug has not blown.
• The fridge has not been turned off
• The plug socket is functioning fine. To check this, plug another electrical appliance in the same socket to see if there is power.
IF THE APPLIANCE IS WORKING, BUT NOT VERY WELL, YOU SHOULD CHECK:
• The appliance is not overloaded.
• The thermostat is set to an appropriate temperature
• The doors are closing properly
• The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall.
• There is enough ventilation at the side and rear walls
• This can be due to the decor door panels not being properly fitted, causing the fridge door to not close properly just letting
warm air in. If you are at all unsure, please ask your cabinetmaker to check the decor door panels.
IF THE APPLIANCE IS NOISY, YOU SHOULD CHECK:
• That the appliance is level and stable
• The side and rear walls are clear, and there is nothing resting on the appliance
NOTE:
the cooking gas in the refrigerator may make a slight bubbling or gurgling noise, even when the compressor is not running
IF THE APPLIANCE IS BEEPING, YOU SHOULD CHECK:
• That the door is closed properly. An alarm will sound after 60 seconds of a door being left open
IF THERE IS WATER IN THE BASE OF THE REFRIGERATOR COMPARTMENT, YOU SHOULD CHECK:
• The drain hole at the back of the compartment is clear and not blocked
IF ICE HAS FORMED ON THE BACK WALL OF YOUR REFRIGERATOR:
It is normal for some ice droplets to form at the back wall of the fridge. This does not constitute a fault with the appliance.
• Ensure that no items inside the fridge are in contact with the back wall
• Check that there is some resistance when opening the door of the appliance. If it opens at the slightest touch it may mean that
the door sill needs to be replaced.
• Check the door sill for any kinks, debris or damage. If you notice any irregular, and are unable to resolve the issue yourself,
contact customer care so that the seal can be replaced
This can be due to the decor door panel not being properly fitted. If you are are at all unsure, please ask your cabinetmaker to
check the decor panel
IF THE LED LIGHT IN THE UNIT IS NOT WORKING
Contact customer care to arrange for a service call