ILVE AG100, Инструкция по использованию и техническому обслуживанию

Страница: 29 / 32

29
INSTALLER
E000159000089
AG90/SS
Motor : 1000 m3/h
Lamps: Led 2x1,2 W
Serial n°: CA470079
Voltage: 220/240V 50Hz
CA470079 20/11
Max Power: 350W
Tipo motore
Numero di serie
Tipo illuminazione
Nome
commerciale
Codice modello
Tensione alimentazione
Potenza totale
della cappa
Fig. 3.
A Max :
PRELIMINARY
INSPECTION
After opening the package, please inspect the equi-
pment
for any possible damage that could have occurred during
transport. If the product is damaged, please take note of
the data printed on the product label (Fig. 3.) and promptly
notify the
data to your Supplier.
TRANSPORT
The transportation, loading and unloading of the product
should be performed by personnel wearing all the neces-
sary protections (Fig. 1.). When handling the equipment,
implement all the necessary precautions to avoid damage
to the same or to people and property, complying with the
instructions found on the packaging.
When handling the equipment, always use clean
cotton gloves to avoid fingerprints.
FIRST-USE PREPARATION
After the hood installation, please remove the protective
film and carefully clean the external surface (Fig. 2.).
Please note that the use of acid-based cleansers
could damage the hood surface, so use a neutral or a
steel-specific cleanser only.
All packaging and the protective film must be
disposed of in accordance with the regulations of the
country of use. Always make sure that nothing is
disposed of in the environment.
Packaging materials may be potentially dangerous
for children and animals.
HOW TO READ PRODUCT LABEL
The product label is located inside the hood,
usually attached on its bottom, being visible
after the removal of the anti-grease filters. The
label shows essential data and information
about the product regarding installation,
customer service and warranty-related repair,
as well as instructions to determine the correct
spare parts for the specific model.
Please do not remove, damage or alter in any
way the product label, since this could
impede the Manufacturer from identifying the
product in case of need.
INSTALLATION
Fig. 1.
Fig. 2.
Hood model
Hood serial number
Type of illumination
Type of motor
Product code
Power voltage
Total power