7
TR-CUT45
OPERATING INSTRUCTIONS
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting
head.
NOTE: Connect head to 10,000 PSI hydraulic pump.
CUTTING
1. Make sure the blade is fully retracted.
2. Pull head locking pin to open head.
3. Close head and secure locking pin in place. Be sure tool head is completely locked before
cutting or damage will occur.
CAUTION: always wear eye protection
while cutting
WARNING:
Hardened material can fly
when cutting. Always point away from
people or objects.
4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blades.
5. Advance the blade.
6. Once cut is complete, fully retract the blade.
