Iloxair ILOX 129, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 36

27
Heat Recovery Unit ILOX 129 - Installation, Operation and Maintenance
FläktGroup DC_10201GB_20190207_R2 We reserve the right to make changes without prior notice
PARAMETER LIST
Parameter Type of value 1) Range Unit Standard value Comment
7.4 Contact functions
DI1 Timer input 1
R/W NO/NC – NO
DI2 Timer input 2 R/W NO/NC – NO
DI3 Rotation monitor R/W NO/NC – NO Not applicable to domestic ventilation
DI4 Pressure monitor
defrosting
R/W NO/NC – NO Not applicable to domestic ventilation
DI5 Fan / Filter monitor
TF
R/W NO/NC – NO Not applicable to domestic ventilation
DI6 Fan / Filter monitor
FF
R/W NO/NC – NO Not applicable to domestic ventilation
DI8 Fire alarm R/W NO/NC – NO External function, should be changed to NC during use
DI9 Cooker hood con-
nector
R/W NO/NC – NO Not applicable to domestic ventilation
DI7 Alarm heating R/W NO/NC – NO Not applicable to domestic ventilation
DI10 Alarm cooling R/W NO/NC – NO Not applicable to domestic ventilation
8. Configuration
8.1 IP address R/W Static / Dynamic – Dynamic
Static = Manual setting
Dynamic = Automatic assignment of IP address via DHCP
IP address R/W – – –
Subnet mask R/W – – –
8.2 Menu config.
Log to USB R/W Yes / No – No Only for troubleshooting
Unit type R – – Domestic
Auto logout time R/W 0-32767 min 10
Threshold value heating R/W 0-100 % 0 For installation engineers and
service personnel
Threshold value cooling R/W 0-100 % 0 For installation engineers and service personnel
Threshold value recovery R/W 0-100 % 0 For installation engineers and service personnel
Threshold value external
fan
R/W 0-100 % 5 For installation engineers and service personnel
8.3 Screen saver
Screen saver R/W On / Off – On
Time R/W – min 10
8.4 Modbus
Modbus slave address
BMS
R/W 0-255 – 2
Baud rate R/W 9.6, 19.2, 38.4 – 19.2
Parity R/W no parity, even, odd – None
Data bit R/W 7.8 – 8
Stop bit R/W 1.2 – 1
8.5 Mac address
Mac address R – – –
8.7 Password
Automatic logout R/W Yes / No – Yes
Password 1 R/W – – – Used to change the password
8.8 Om
Software HMI – – –
Software control card R – – –
Bootloader version R – – –
1) R/W = Read and write value, R = Read only value