Operation
The buttons largely correspond to the buttons on the controller. However, the buttons cannot
be held down.
•
In active MODE, the AIR button can be used with the mouse like on the controller. Press-
ing the mouse button opens the valve, releasing it closes the valve again.
However, this only works if the mouse pointer is still on the AIR button.
•
The UP and DOWN arrow buttons change the temporary setpoint in active MODE.
•
The OK button only works in active MODE, and sets the current pressure as the new set
value.
•
The START button starts or ends in the current operating mode.
•
The Pmin button functions the same as without a controller.
The following menu items can be selected from the menu bar:
•
File
•
Measure !
•
Settings !
•
Calibrate !
•
Factory settings !
6.9.1 Menu
item:
„File“
File
Save settings
- Saving the Settings dialog settings in a file
Load settings
- Loading the Settings dialog settings from a file
Print settings
- Printing out an image of the Settings dialog on the standard printer
Save memory
- Saving the pressure data in a file
Load memory
- Load the print data from a file
Print curve
- Printing out the current pressure curve on the standard printer
Password
- Changing the basic setting of the controller is password-protected.
Release is given by inputting the date as a hex number.
Example : 13.02.2009 = 130209 = 1FC9D
(Required for activating the "Calibrate" and "Factory settings" menus and the direct input of
pressure offset und pressure factor in the „Calibrate“ Dialog)
Info
- Information about the program version
Exit <ESC>
- Exit program
115022 Ilmvac
GmbH
33