13
MATRIX MANUAL 2014
I l l u s i o n - A u s t r a l i a n M a d e G a s L o g F i r e s
MAINTENANCE
ANNUAL SERVICE SHOULD BE PERFORMED ONLY BY AN AUTHORISED
PERSON.
1) Clean the burner and control compartment of lint and house dust by brushing and
Vacuuming at least once a year. When cleaning the logs, use a soft clean brush as
the logs are fragile and easily damaged.
During the annual service the burner should be inspected and cleaned.
2) When unit is cold, wipe surfaces with a damp cloth. Do not use abrasive cleaners.
Parts of the appliance are painted with a heat resistant paint. To retouch, refer to
manufacturer.
3) Check the flames periodically. The flames should be steady and not lifting off the burner
holes. The logs should not have any sooting (black areas). If there is a problem, call an
authorised gas fitter or your local dealer.
4) The appliance and flue system must be inspected by an authorised person before using and
at least annually. The burner should be inspected and cleaned if required.
5) Keep the area near the appliance clear and free from combustible materials, gasoline
aerosols, and other flammable vapours and liquids
Replacing Logs
The unit should never be used if the logs, coals or rocks are broken. Always turn the gas valve off before
servicing and allow the unit to cool before handling any parts. Remove logs carefully.
Any parts should only be replaced by an Authorised person.
Note: Improper positioning of logs/coals/rocks may create soot build up and carbon monoxide, which will
affect appliance performance. Improper or altered positioning may void your warranty.
