IDS-1100 Dermatoscope
Direction for use
1 Hold the IDS-1100 with a magnifying lens (ML) side up
2 Push the power button (PB) to power on the LEDs
3 Place the protect glass (PG) on the lesion to be examined.
You can also open the protect glass (PG) for non-contact examination and avoid contacting the affected part.
4 Adjust your eye close to the magnifying lens (ML)
5 Turn the focus dial (FD) forwards or backwards to obtain the desired image focus.
6 In order to change the polarization mode, push the polarization mode button (PMB)
7 To brighten up or down the LED lamps, push the brightness control button (BCB)
8 Examine the skin lesions.
9 When necessary, measure the size of the lesion using the scale on the lens.
10 When the examination has been finished, push the power button to power off the LEDs.
11 Clean the magnifying lens (ML) and the protect glass (PG). The exterior of the IDS-1100 may be cleaned or
sterilized with isopropyl alcohol (70% vol) and/or a lens cleaning cloth.
12 Store the device in a safe place.
This device may only be used together with accessories supplied by ILLUCO Co., Ltd.
If the customer makes use of other accessories, use them only if their safe usability under technical aspect has
been proved and confirmed by ILLUCO Co., Ltd.
Smartphone Adapter
1 fit the suitable smartphone adapter on your smartphone and put your IDS-1100 on it.
2 Run a camera application on your smartphone
3 follow the instruction 5, 6, 7 (direction for use) and then check the lesion direct from your smartphone.
4 You can enlarge the lesion for most detailed view and capture its images.
07
