4
TIPS !
How to remove and re-insert the tube:
Press down on the [release ring plate], hold the tube and push inward a little and then
draw it out. Now you can re-insert the tube again for a proper connection.
Use the [1/4” misting ring tubing long] to link the end side [nozzle units]. Then use the [1/4”
misting ring tubing short] to connect the end side of a nozzle unit and the end side of the T
connector. Now a misting ring has completed.
Insert the [misting tube] to the [T connector]
3. You can now put the ring onto an outdoor fan. Use the cable tie to tie the ring to the fan’s
front mesh. Fan can use the power socket provided by the pump unit or any other
appropriate wall socket.
CAUTION!
The socket only provides 120VAC 5AMP rating. Never overload the socket.
4. Insert the misting tube to the [mist outlet connector], refer to page 6, of the pump unit.