iLive | IT319B
8
using the Built-in dVd/cd Player
loading a cd or dVd
Playing a cd or dVd
Video output from a loaded dVd
Programming a cd or dVd
IMPORTANT: The CD or DVD must be loaded
with the label side facing in the same direction as
the front of the unit.
The unit must be connected to an external display
before viewing a DVD.
Press the
Power Button
to turn the unit on.
Press the
Source Button
to switch to
DVD Mode
.
Load a CD or DVD into the unit.
Press the
Play/Pause Button
to play the loaded
CD or DVD.
Video can be output from a loaded DVD using
any of the available video outputs on the unit.
(Composite, S-Video, Component, or HDMI)
Connect the bar speaker to the display using the
desired video output that has a corresponding input
on the display.
Press the
Source Button
to switch to
DVD Mode
.
Load a DVD into the unit.
Press the
Play/Pause Button
to play the loaded
DVD.
First press the
Source Button
to switch to
DVD
Mode
, and load a CD or DVD into the television
Press the
Program Button
.
Use the
Number Keypad
to enter in specific titles
and chapters or tracks in the order you want them
to play.
Press the
Directional Buttons
to select the
on-screen
Start
button to begin playing your
programmed DVD.
To cancel a set program, press the
Program
Button,
then use the
Directional Buttons
to select
Stop
then
Exit
.
LABEL SIDE
SUB
WOOFER
OUTPUT
Pr
Pb
Y
COMPONENT
VIDEO
OUTPUT
AV 2
VIDEO IN
AV 1
VIDEO IN
AUX INPUT
OUTPUT
ANTENNA INPUT
HDMI Output (DVD only)
Use to connect the unit to a high
definition display.
S-Video Output (DVD or iPod)
Use to connect the unit to a display
using an S-Video cable.
Component Video Output (DVD
only)
Use to connect the unit to a display
using component video cables (not
included).
Composite Video Output (DVD,
iPod, or AV Inputs)
Use to connect the unit to a display
using RCA video cables (not
included).