iLive 600SKM, Инструкция по эксплуатации

Страница: 11 / 16

-
Lift the two levers shown in fig.
-
Close the door as far as the first stop (caused by the raised levers).
-
Lift the door upwards and outwards to remove it from its mountings.To replace fit the door, fit the
hinges in their mountings and lower the two levers.
INSTALLATION INSTRUCTIONS
Flush fitting
The oven can be installed under a work top or in a cooking column. Figure shows the installation
dimensions. Make sure that surrounding materials are heat resistant. Align the oven centrally with
respect to the sidewalls of the units surround-ing it and fix it in place with the screws and Allen
screws provided.
ELECTRICAL CONNECTIONS
Before connecting the oven to the mains power supply,make sure that:
-
The supply voltage corresponds to the specifications on the data plate on the front of the oven.
-
The mains supply has an efficient earth (ground) connection complying with all applicable laws
and regulations. Correct earthing (grounding) is a legal requirement.The power cable should
never reach a temperature 50° C above ambient temperature at any point along its length.If a
fixed appliance is not provided with a power cable and plug, or some other device permitting it to
be disconnected from the mains electricity supply, with a gap between the contacts big enough
to guarantee class over voltage protection, then such a device must be fitted to the power supply
in compliance with the regulations governing electrical installations.The socket or switch must be
easily reachable with the oven fully installed.
N.B. The manufacturer de-clines all responsibility for damage or injury if the above instructions and
nor-mal safety precautions are not respected.
The manufacturer declines all responsibility for possible inaccuracies contained in this pamphlet,
due to printing or copying errors. We reserve the right to make on our own products those changes
to be considered necessary or useful, without jeopardising the essential characteristics.