iLive Platinum CONCIERGE ISWFV387G, Руководство пользователя

Страница: 10 / 24

10
4. Connect to Wi-Fi
To use the speaker’s Wi-Fi features, the speaker and your mobile device must both
be connected to a Wi-Fi network. The app will guide you through the process, just
follow the on-screen instructions and have your network password ready.
After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below or try the
Alternative Connection Method (See pg. 12).
Initial Wi-Fi Connection
Note: If you have a dual band wireless router, be sure to connect using
the 2.4GHz band.
1. Press and hold the Power button to power on the speaker. The Mode/
Connection LED may flash multiple colors after first powering on.
This is
normal, please wait for the Mode/Connection LED to begin slowly flashing white,
indicating the speaker is in Wi-Fi Standby Mode.
2. Press and hold the Pair (WPS) button on the speaker.
3. Open the iLive Wi-Fi app on your device and press “Add Device”. Follow the
on-screen prompts and enter your Wi-Fi password (Image A, B, right).
4. The app will display it’s progress as it configures the speaker and your Wi-Fi
network. When the speaker and your device are successfully connected to Wi-Fi,
a voice will announce the connection and the Mode/Connection LED will turn
solid white. Press “Finished” to start using the app
(Image C, D, right).
SETUP