ilco 79M Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 38

ilco 79M Series Скачать руководство пользователя страница 18

PK3561_10_09 • 79 SERIES INSTALLATION GUIDE

17

NOTE: For locks with Best Removable core, skip steps a,b &
c below. Assemble Best core and adaptors as per instructions
F5, F6 & F7 on page 21. Then follow step 4 of this page. Step
to attach the lever handle to the lock housing.
a. Insert the cylinder (J) without key (N) into the lever handle
(H) (see Fig.3)

b. Put the cylinder plug (K) into the lever (H) (see Fig.4)

c. Insert key (N) into cylinder (J). Hold plug (K) in position. (See
Fig. 5).

Caution: If the Lever is Not Assembled with the key in the
position shown in Fig. 6 & Fig. 7, the inside mechanism
of the lock could be damaged if the lever is rotated and
forced.

!

3. Preparing the lever handle and cylinder for

installation

Right-handed Lever handle: Turn the key (N) aprroximately
to 100º clockwise so that it is in the vertical position and the
recess entry for key is in the top position. (See Fig. 6)

Left-handed lever handle: Turn the key (N) approximately to
100º clockwise so that it is in the vertical position and the
recess entry for key is in the bottom position. (See Fig. 7)

The key (N) and the recess entry for key must be in the
positions shown in Figs 6 & 7 before placing the lever
handle on the housing or the lever and the override
mechanism will not work.

!

Troubleshooting:

If  you  have  assembled  the  lever  and  housing  with
the  key  (N)  in  the  wrong  position,  the  key  (N)  will
get  stuck.  To  remove  the  key  (N),  turn  it  so  that
it  is  in  the  vertical  position  and  insert  a  small  flat
screwdriver  (T)  (see  page  15)  into  the  hole  under  the
lever  handle  to  push  Lever  Catch  (F)  in  (see  page16
Fig.2).  Remove  lever,  remove  key.  If  it  is  still  stuck,
turn  the  key  90º  clockwise  to  the  horizontal  position
and  push  the  Lever  Catch  (F)  in  again  with  the  small
screwdriver (T). Remove key (N).

Fig. 6

Recess entry for key in the top position

Fig. 7

Recess entry for key in the bottom position

4. Steps to attach the lever handle to the lock

housing
*NOTE: the position of the key is very important

Fig. 3

(J)

(H)

Fig. 4

(H)

(K)

Fig. 5

(N)

«
...
16
17
18
19
20
...
»

Содержание 79M Series







































Отзывы:

Нет отзывов