TM60Pi (06/00)
PAG. 4
3.2.- Receiver
Make sure that the crane is stopped for the entire duration of the
assembly process, keep the work area free and wear protective
clothing.
Park the crane and position stop-ends, (if these are not available use
appropriate signs), at a suitable distance so that it is not hit by other
cranes on the same runway.
Check the power-supply voltage and turn off the mains switch.
Find a suitable location for the receiver, away from any intense radioelectric
disturbance source and install the receiver cabinet using 4 elastic absorbers.
The receiver antenna must be placed free of shielding by metal parts which could
obstruct reception of the signal. If this is not possible, please request an antenna with
cable extension.
