Doc ID:IKUSI OP-13TX Optical Transmitter User Manual V1
Page
4
of
13
© 2018 IKUSI ANZ Pty Ltd - All rights reserved - Reproduction without consent is prohibited
02-May-2018
1.2
Key features
•
Dual Module RF driver, high efficiency laser pre-distortion adjustment.
•
Full-automatic OMI control, AGC & MGC
•
Under AGC status, input level is between 78~88dBuV, and system index is optimum.
•
Under MGC status, input range can be adjusted between 75~90dBuV by the ATT on
front panel.
•
Under AGC status, within RF range, OMI is always at NOM status.
•
Under MGC status, OMI can be at NOM status by adjusting ATT.
•
Built-in dual backup power supplies; Switch full-automatically.
•
One is working, with the other as cool backup (suggested).
•
Both are working at the same time, with one as hot backup. If one is damaged, it will
switch to the other full-automatically. Switch time ≤10us.
•
Case temperature auto-control, ensure the long life of the laser.
•
Case temperature is monitored and controlled by microprocessor. The display screen
shows the actual operation temperature in time.
•
When casing temperature≥45ºC, two fans at the back panel will open automatically to
make compulsive cooling.
•
When casing temperature≤35ºC, the fans will stop automatically to ensure its life-
span.
•
Applicable receivers OP-1Rx & FRD-400
