3
Programming MHD-201 Modules
START SCREENS
1 - Module Basic Information
As described in Basic Handling guide supplied with the SPI-300, on connec-
ting it to the module the identification data, settings and status of the module
are loaded onto the remote. The module detection screen appears for a short
time, and then the display shows the Basic Information screen, which con-
tains its most representative data:
The meanings of expressions and data presented are:
Module name.
F 02.18: Version of the module firmware (the firmware is software stored in
the module that is responsible for its basic operation).
CH 21: By default the output channel is 21.
SYSTEM OK (status correct); NO IMPUT (no input signal is detected; SYSTEM
NOK (status incorrect).
Pressing the OK command (key ) takes us to the Main Menu Screen (Basic
Handling Manual).
2 - Main Menus
As indicated in the Basic Handling Manual, the
General menu
and
Langua-
ge
are identical for all ClassA modules and their commands are described in
it. Setting
and
Info
Menus
include, however, options or information, unique to
each module type.
MDHD-201
F 02.18
CH 21
SYSTEM: OK
OK
