background image

4

Introduction

About this Manual

This manual describes the configuration environment of the MAC 201 unit based on a web 
interface via Ethernet connection.

The scope of the configuration options is complete: start-up, settings and fault monitoring 
for the MAC 201 unit.

The description consists of the procedure for connection and access to the configuration 
environment, the description of the environment and its contents, the configuration options 
and the interpretation of the information on the screen.

NOTE

This configuration manual is a practical reference. For the correct use and instal-
lation of the MAC 201 unit the corresponding user manual must be read.

Product Description

The MAC 201 unit is a standalone modulator of analogue TV input signals to COFDM 
digital TV output signal. The analogue TV input is composed of video and stereo audio. The 
COFDM digital TV output is tuned with an RF carrier that can be configured in VHF or UHF 
bands.

Suitable for individual residential installations, it is an ideal solution for the distribution of 
analogue video signals with COFDM digital TV modulation in a single standalone unit.

Features:

 

J

Input: 2 AV analogue TV signals.

 

J

Output: COFDM digital TV signal on RF carrier in VHF/UHF.

 

J

RF loopthrough.

 

J

Means of configuration:

 

F

Web interface via Ethernet connection

 

F

LCD display and control button.

Содержание AV-COFDM

























Отзывы: