Ikra IAAS 40-25, Руководство по эксплуатации

Страница: 31 / 116

GB |
Operating Instructions
8
• Avoid unusual postures and do not
cut above shoulder height. This avoids
accidentally touching objects with the tip
of the bar and allows for a better control
of the chain saw in unexpected situations.
• Only use the replacement bars and
chains prescribed by the manufactur-
er. The use of wrong replacement bars
and chains may lead to chain breaks or
kickbacks.
• Adhere to the manufacturer’s instruc-
tions to sharpen and maintain the
chain. Depth limiters that are too low
increase the risk of a kickback.
• Set the loop so that it is not detected
during operation of branches or the
like.
9) Important instructions for your
personal safety
A) General safety instructions
1. Never attempt to use an incomplete
machine or one which an unauthorised
alteration has been implemented.
2. These devices are not designed to be
operated by persons who have insuf-
ficient experience and/or insufficient
knowledge or by persons with impaired
physical, sensory or mental capabilities,
unless they are being supervised by
a person who is responsible for their
safety or they are receiving instructions
about how these devices are to be used.
3. Children and young persons under 18
may not operate electrical chainsaws,
with the exception of apprentices older
than 16 under the supervision of a
trained adult.
4. The chainsaw may only be used by
persons who have sufficient experience.
5. Always keep these Operating Instruc-
tions together with the chainsaw.
6. Only lend or give this chainsaw to per-
sons who are familiar with its use. Also
give them these Operating Instructions.
B) Instructions on using the chain saw
safely
7. Attention! Read the Operating Instruc-
tions carefully and have yourself in-
structed in the use of a chain saw before
you use it for the first time.
8. Always store your electric tools in a
safe place. Electric tools not being used
should be stored in a dry, inaccessible
or locked place, outside the reach of
children.
9. Always hold the chain saw with both
hands while working with it.
10. The chain saw must be disconnected
from the power supply before you tight-
en the chain, exchange the chain or
carry out any other work on the saw. -
Remove the rechargeable battery!
11. During work breaks put the machine
down in such a manner that nobody is at
risk. Remove the rechargeable battery.
12. When switching on the chain saw, en-
sure that it is supported well and hold it
firmly. The chain and bar must be free.
13. The chain saw may only be used in a
completely assembled state. No protec-
tive devices may be missing.
14. Switch the chain saw off immediately if
you notice any changes in the machine.
15. Always have a first-aid kit fulfilling DIN
13164 at hand in case of accidents.
16. If the chain saw comes into contact
with earth, stones, nails or other foreign
objects, withdraw the plug / battery im-
mediately and check the chain as well
as the bar.
17. Ensure that no chain oil penetrates into
the earth or sewage. Always place the
chain saw on something that will absorb
any oil dripping from the bar or chain.
18. Avoid to use the trimmer in poor weather
conditions, especially if there is a risk of
a thunderstorm.