Ikon IK23 Скачать руководство пользователя страница 5

12/12/2018

5

n

If your product's periodic cleaning is not made in a timely

manner, it could pose risk of fire.

n

De-energize the appliance before any maintenance operations.

(Plug off the appliance or turn off the main switch.)

n

When electric cooker hood and devices fed with energies other

than electricity operate simultaneously, the negative pressure

in the room must not exceed 4 Pa ( 4 X 10 bar ).

n

Gas or fuel oil burning appliances, such as room heaters,

which share the same environment with your product, must be

fully insulated from the exhaust of this product or they must be

hermetical.

n

When you make a flue connection for your product, use pipes

with a diameter of 150mm or 120 mm. The length of the duct

connection as well as the number of elbows must be as min-

imum as possible.

n

Children must not play with the appliance.

n

For your safety, use ”MAX 6 A” fuse in the hood system.

n

Since the packing materials could be dangerous, keep them

away from children.

n

If the feeder cable is damaged, it must be replaced by its man-

ufacturer or its authorized technical service or any other per-

sonnel qualified at the same level, in order to avoid any dan-

gerous situation.

n

In case of any deflagration, de-energize the cooker hood and

cooking appliances, and cover the flame. Never use water to

extinguish the fire.

n

When cooking appliances are in operation, their accessible

parts could be hot.

n

This appliance is not intended to be used by people with phys-

ical, sensory and mental disabilities (including children) or

those who have not adequate experience and knowledge

regarding its use, unless they are under the supervision of a

person responsible for the safety of the appliance.

n

After the installation of the hood, the minimum distance must

be 65 cm between the product and any electric cooker; and 75

cm between it and any gas ranges or cookers burning other

fuels.

n

Output of the hood must not be connected to air ducts, where

there exist another smokes.

n

You must be careful when using the appliance spontaneously

with other appliances (e.g. gas, diesel fuels, coal, wood, etc.

burning heaters, shower heaters), which use the same air in

the same environment. Attention must be paid when using

them simultaneously. It is because the hood could adversely

affect the combustion, by discharging the ambient air.

n

This warning does not apply to uses without flue.

n

When electric cooker hood is used simultaneously with devices

that use gas or other fuels, there must be sufficient ventilation

in the room (might not apply to devices that discharges the air

back into the room).

WARNING AND SAFETY PRECAUTIONS

 

07.02.2019

4260 HOOD USER GUIDE

7

Содержание IK23






















Отзывы: