12/12/2018
14
Fig. 8
n
Parts inside the appliance may have sharp edges. Use protec-
tive gloves (Fig. 8).
CAUTION!
– The furniture that the appliance will be
mounted on should be resistant to 90°C tem-
perature.
– The durability of the furniture that will be
mounted on should also be ensured after the
cutting operations have been completed.
– Particularly in thin plates the carrying capacity
and durability should be provided with suitable
support parts. Consider the weight of the appli-
ance by including additional loads. The rein-
forcing material used should be heat and mois-
ture resistant. The weight of the appliance is
specified in the label on the package.
– Clean the sawdust after cutting. Cover the cut
surfaces so that they are heat resistant and
waterproof.
– The cross-sectional surface angle to the
working plate should be 90°.
ASSEMBLY OF PRODUCT
07.02.2019
4260 HOOD USER GUIDE
18
500 mm
878 mm
Fig. 9
1.
Cut the surface where the appliance will be mounted in align
with the specified measurements in the technical illustration
(Fig. 9).
ASSEMBLY OF PRODUCT
07.02.2019
4260 HOOD USER GUIDE
19
