IKL ELIPTIKO, Руководство пользователя

Страница: 15 / 19

minutes) close the primary air regulator .
Openings for air (primary and secondary) should be open together only until stabilisation of fireplace
operation is achieved.
Best combustion is achieved when most of combustion air goes through secondary air regulator.
Never overload the furnace!
The warranty does not cover any damage due to overheating.
You should always use your fireplace with door shut in order to avoid overheating.
Regulation should be set as follows:
Fuel Secondary air Primary air
Wood Open Shut
Quantity of wood per hour : 1.8- 2,0 kg
16. OPERATION IN THE INTERIM PERIOD
In periods inbetween of seasons, when outside temperatures are higher, or if the temperature rises
suddenly, it may happen that combustion gases cannot be completely pulled out of the chimney.
Remaining gas can be identified by sharp smell; to overcome this situation shake the grate more
often, increase combustion air flow and add small quantities of fuel which will burn up faster and thus
stabilize the air flow.
Check if cleaning holes and connections to chimney are well closed.
17. CLEANING
17.1. Furnace cleaning
Clean painted areas with soapy water or non-agressive and chemically neutral, non-abrasive
materials at cold furnace. Dry washed surfaces.
Use water and detergent to clean glass. Glass must be dry prior to furnace usage. Do not use
abrasive means which impair glass surfaces.
17.2. Cleaning of flue pipes
The entire device must be thoroughly cleaned at least once in a year, or always when necessary (in
case of faulty function). Clean flue pipes only at cold furnace (when it does not operate).
17.3. Cleaning of ash drawer
We recommend daily removal of ashes. Never let ash to form deposits reaching the grate, as this
would impair the primary air circulation and slowly put out the fire.