Instructions for installation and use | IKI electric heaters with Finlandia control unit Page
10
Installation of the control panel
1.
See page 9 for the installation guidelines on the platform and distances.
2.
Screw a hole of 70mm in to the panel for the box. Be careful not to drill as far as the insulation. If you
damage the foil insulation, fix it with aluminium tape.
3.
Place the box in the hole. Use the materials provided to affix it in place.
4.
Lead the wires from the heater along the bottom of the panel to the hole and through to the box.
5.
Attach the wires to the unit, as above. Press the unit down to the box. The unit is affixed with two steel
pins.
6.
Attach the control unit to the heater according to instruction on page 8. NOTE that the installation can
be administered only be a qualified electrician.
Note that the mounting box is not delivered with the heater. You can use boxes such as ABB wall plate
mounting box AUS-15. 2p. Mounting boxes are sold in all well-equipped hardware stores.
N. Definition
Color
8 +5V
Pink
7 GND
Grey
6 LIGHT
Red
5
TR2 Blue
4
TR1 Green
3 RELAY
White
2
TEMP Brown
1 EXT Yellow