43
-
Repeat the same procedure for the opposite side of the roof tarp (19).
-
Check and make sure all the bottom cross rails (6) are level and horizontal, and are of the
same height from the ground.
-
Tighten all the nuts and bolts at this stage.
-
Fasten the black straps at the four corners with the ratchet tie-down (22). For details, see
the corresponding instructions on page 7.
-
Now the garage is ready for use.
WARNING!
Check and tighten the bottom cross rails (6) and ratchets (22) monthly to
ensure that the roof tarp (19) is tight and safe. When disassembling the
garage, press the spring-loaded bar and open the ratchet handle completely to
pull out the strap (fig. 21).
Spring-loaded
bar
Tube sleeve
Tube sleeve
Bottom cross rail
Fig. 20
Fig. 21