17
3.
To remove the diffuser, bend one tab out towards the edge while
lifting simultaneously.
A lanyard or string can be attached to the diffuser by threading it
through the two circular openings near its edge. Attach the other
end to the strobe arm to prevent accidental loss.
Maintenance
Post-Dive
1.
Always re-check o-ring seal after removing the battery door from the
strobe. Most importantly, make sure the o-ring is in place prior to
re-attaching the battery door.
2.
Make sure the battery door is on and tightened down. Rinse your
strobe in fresh water. Do not remove the sync cord prior to rinsing.
Dry thoroughly.
3.
NEVER leave your system in a fresh water rinse tank. Collisions
with other peoples’ gear can cause scratches or damage to your
equipment.
4.
Stow your system in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the system with a towel or cloth.