26
Camera does
not take a
picture
• Install a fully charged battery.
• There is not enough available light for the camera
to properly focus. Add a focusing light or strobe
with a built-in focusing or video light to your
system.
• Select a center focus point in your camera menu.
Housing is
hard to close
• Make sure the camera is mounted properly in the
housing and controls are out of the way.
• Main housing o-ring is not seated properly.
• Hotshoe cord is in the way.
Fogging
occurs on the
Lens Port
• Humid air is trapped inside the housing.
The camera produces heat and may
condense any trapped moisture forming fog
on the lens port. Close the housing in an
air-conditioned room or vehicle, or in front of an
air-conditioner.
• The housing should not be in direct sunlight for
an extended period of time.
• Purchase desiccant packs from a local camera
store. Place one or two new packs in your
housing before each day of diving.
• If moisture or water droplets are present
around the controls or sealing areas, return the
housing to Ikelite for evaluation.
• Clean the main housing o-ring and sealing
surface of the housing.
Troubleshooting - continued
