Using a 9/16” open/box end or socket Wrench
(not supplied)
, firmly
tighten the External Tray to the Housing Base using the two 3/8-16 Nuts
supplied in the accessory package.
Note:
Tray and Handle may be attached before or after the camera is
secured in the Housing. We recommend attaching it immediately to avoid
scratching table tops with the Tray Mounting Bolts.
External Tray & Handle
3/8-16 Nut
Wrench -
not supplied
Housing and Camera Setup
STEP 1 - Attach Tray and Handle to the Housing
7
Tray Mounting Bolt
