CANON
EOS
7D
Mark II
Installing Camera in Housing
Before installing the camera, pull out on the controls in the front section of
the housing. This will allow the camera to slide in easier. Once the camera
is installed and the lid snaps have been closed, return the controls to their
operating position and check function.
Attach Camera to Housing Tray
Position the camera and lens on the Camera Tray, and then secure it
with the mounting bolt which threads into the camera’s tripod socket.
Use a flathead screwdriver (recommended) or coin to tighten the
mounting bolt so the camera bottom is flush against the tray.
Mounting Bolt
Camera Tray
11
Leveling Screw (Pre-adjusted)
