22
Push button controls normally require no maintenance other than
rinsing in fresh water after saltwater use. Depress each push button
in fresh water several times to eliminate trapped saltwater. If a push
button control becomes difficult to push or if it sticks when depressed,
soak the housing in luke warm fresh water. After a few minutes,
operate the push button. If this does not correct the problem, return
the housing to Ikelite for maintenance. If you are on a trip and unable
to return the housing immediately, a push button may be lubricated by
pressing and holding the push button all the way in. Then, use your
finger or other small non-metal object to place a small amount of lube
at the base of the shaft inside the housing.
Press and release the push button several times until the lube is
worked up into the o-ring.
Apply Ikelite
Lube Here
