3
Initial Camera Settings
-
Set Date and Time.
-
Insert and Format an SD memory Card (2 GB or higher recommended).
-
Set Shooting Mode to “P” Program AE.
-
Set ISO to “100.”
-
Set White Balance to “Auto.”
- Set Flash Mode to ON “lightning bolt only.”
-
Set Face Detection to “Off.”
-
Set AF Mode to “Center.”
-
Set LED Illuminator to “Off.”
A strobe focusing light is recommended to assist AF underwater.
Note:
Enable Macro mode when shooting close-up subjects. If
overexposure occurs, back away from the subject and zoom in.
External Accessory Lenses
An external wide angle conversion lens increases angle of coverage so
you can get much closer to your subject while still fitting everything in the
frame. By reducing the amount of water between the subject and your
camera lens, the resulting image will be more crisp and colorful.
Moderate vignetting (shading in the corners) may be present in the
widest angle setting when using external accessory lenses. This effect
can be eliminated by zooming in slightly.
Attach 67mm threaded #6420 Ikelite W-20, Inon Type II, and Epoque
lenses using the #9306.78 port adaper. This adapter may also be used to
attach 67mm threaded macro lenses.
Attach bayonet style Inon macro or UWL-100 28AD, UWL-105AD and
UFL-165AD wide angle lenses using the #9306.85 port adapter.
