12
Installing the Camera
1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Remove the camera mount plate from the housing.
3. Pull the bottom of the rear LCD screen away from the camera
body slightly. A thin wall on the top of the mounting plate will
rest between the camera body and the LCD screen for proper
alignment.
4. Line the mount screw up with the camera’s tripod socket. Use a flat
screwdriver to tighten the mount plate to the camera.
Mount screw
1/4-20 tripod
mount
Camera
tripod socket
5. Insert the mount plate into the slot on the inside bottom of the
housing. Push the camera all of the way forward until it stops.
6. Check orientation with the camera.
»
The camera may be attached to a tripod using the 1/4-20
threaded mounting hole on the bottom of the mount plate.
LCD screen
