Set Mode Dial to “Av” or “M.”
Set ISO to “200.”
IMPORTANT: In Display Settings, set Display Control to “Manual.” This
option turns off eye-piece automation and must be set, otherwise, the
camera will sense the housing back and shut off the LCD screen in favor of
the optical viewfinder.
RAISE the CAMERA FLASH! You cannot raise the camera flash after the
camera in closed inside the housing.
When using the internal camera flash, DO NOT place housing hotshoe into
hotshoe camera mount. This will deactivate the internal flash. Instead, place
hotshoe directly above the hotshoe camera mount before closing housing.
When using the housing hotshoe, the internal camera flash is deactivated.
7
HOUSING and CAMERA SETUP STEPS
Step 1 - Camera Setup
