3
PREPARATION
This product has been water pressure tested at the factory and is depth
rated to 200 ft (60 m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the main housing o-ring and retest to make sure that the housing is
watertight. Refer to the Troubleshooting section, page 28.
Please read your camera manual thoroughly to have a full understanding of
each camera function.
If you are new to underwater photography, be sure to read the Photo Tips
section, page 27.
Table of Contents - continued
Zoom Control Use ...................................................................P. 17
RECOMMENDED ACCESSORIES and ATTACHMENTS .....P. 18
SPARE PARTS .......................................................................P. 20
MAINTENANCE ......................................................................P. 20
Lens Port .................................................................................P. 20
O-ring Storage .........................................................................P. 20
Lubricant ..................................................................................P. 21
Housing Maintenance ..............................................................P. 21 - 22
Control Maintenance ...............................................................P. 22 - 25
PHOTO TIPS ...........................................................................P. 26
TROUBLESHOOTING ............................................................P. 27 - 29
CUSTOMER SUPPORT ..........................................................P. 30
LIMITED WARRANTY ............................................................P. 30
RETURNING PRODUCTS FOR SERVICE .............................P. 31
PRODUCT REGISTRATION ...................................................Back Page
