9
3.
Pull the bottom of the rear LCD screen away from the camera body
slightly to allow for proper mounting plate alignment .
4.
Line up the Mounting Screw with the Camera Tripod Socket. Use a
flat head screwdriver to tighten the mounting plate to the camera.
Camera Tripod
Socket
Mounting Screw
Mounting Plate
1/4-20 Tripod
Attachment Hole
Rear LCD
Screen
5.
Pull out on the housing control knobs to move them out of the way.
6.
If using external strobes, raise the camera flash. The flash cannot
be raised after the camera has been installed in the housing.
7.
Insert the mounting plate into the housing plate mount slot on the
inside bottom of the housing. Gently push the camera all of the way
forward until the back of the mounting plate is flush with the back of
the housing plate mount.
8.
If using external strobes, check that the camera’s flash is extended
and facing the housing’s fiber optic ports.
