7
Accessory Port
Your housing features one 1/2-20 threaded Accessory Port which
may be used for attachment of factory optional or aftermarket housing
accessories. DO NOT remove the Accessory Hole Plug unless you
are installing a compatible accessory. Visit ikelite.com for an updated
list of compatible accessories.
Lanyard Mount
The included lanyard is a break-away safety lanyard which is designed
to break of stress is placed on it. This is important so that the user can
break free if their equipment is caught on something underwater.
The lanyard is not designed to support the weight of the housing and
should not be used as a carrying strap. Carrying the housing by the
lanyard may result in damage to the lanyard and/or housing.
A different lanyard with a thin cord may be attached to the housing
using the lanyard mount on back of the housing.
Setting Up Your Camera
Pre-Installation Checklist & Initial Camera Settings
1.
Insert a fully charged camera battery.
2.
Insert a properly formatted memory card.
3.
Set AF Illuminator to “Off.”
4.
If using an external flash, set Flash Mode to “Fill-flash.”
5.
Set Red Eye Reduction to “Off.”
6.
Set FINDER/MONITOR to “Monitor.”
7.
Set Touch Operation to “Off.”
