Ikelite 6115.50, Инструкция по эксплуатации

Страница: 8 / 24

8
Tray Mounts
This housing features two 12-24 threaded tray mounts on the bottom
of the housing. The spacing between the tray mounts is 3” (76.2 mm).
Optional tray with handles and mounting hardware are sold separately.
It is recommended to detach and thoroughly rinse the tray mounts,
tray, and mounting hardware, with fresh water routinely during
continuous use and prior to storage.
Lanyard Mount
The included lanyard is a break-away safety lanyard. The lanyard is
designed to break if stress is placed on it. This is important so that
the user can break free if the equipment is caught on something
underwater.
The lanyard is not designed to support the weight of the housing and
should not be used as a carrying strap. Carrying the housing by the
lanyard may result in damage to the lanyard and/or housing.
A different lanyard with a thin cord may be attached to the housing
using the lanyard mount on the side of the housing back.
Setting Up Your Camera
Pre-Installation Checklist
1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Insert a fully charged camera battery.
3. Insert a properly formatted memory card.