22
EV Manual Controller Use
The EV Controller used with Ikelite DS Substrobes has two user
settings. One setting is for strobe selection, the other is for pre-flash “P”
or non pre-flash “ P .” Most cameras use a pre-flash. This means the
EV Controller should be set to the pre-flash “P” position when used with
this camera as a slave. If a manual mode is used that does not emit a
pre-flash, set the EV Controller to the non pre-flash “ P ” position.
A full range of accessories is available to support your housing. Please
visit
www.ikelite.com
to see the most current information about
recommended accessories for your housing.
Recommended Accessories -
continued
Ikelite Technical Support
Email: [email protected]
Phone 317.923.4523
Fax 317.924.7988
Technical Support
Please read the troubleshooting section of this instruction manual before
contacting Ikelite Technical Support.
