12
Problem
Solution
Fogging occurs on
the Lens Port
- Humid air is trapped inside the housing.
The camera produces heat and may condense
any trapped moisture forming fog on the lens port.
Close the housing in an air-conditioned room or
vehicle, or in front of an air-conditioner.
- The housing should not be in direct sunlight for an
extended period of time.
- Purchase desiccant packs from a local camera
store. Place one or two packs in your housing
before each day of diving.
- If moisture or water droplets are present around
the controls or sealing areas, return the housing to
Ikelite for evaluation.
- Clean the main housing o-ring and sealing
surface of the housing, see page 8.
Replacement Parts
Main Housing O-ring 0132.45
Replacement Lanyard 0321.10
Replacement Vinyl Port Cover 0200.02
Ikelite Lube 5020 (4 - 1cc tubes)
For light lubrication of the main housing o-ring.
