Ikelite 200DL, Руководство пользователя

Страница: 25 / 32

25
3. Press and release the push button several times to work the
lubricant into the o-ring.
4. If a push button control becomes difficult to push or if it sticks when
depressed, soak the housing in warm, soapy fresh water. After a
few minutes, operate the push button. If this does not correct the
problem, return the housing to Ikelite for maintenance.
» If it is necessary to remove a housing push button, never
re-use the e-clip. Push button o-ring kits include replacement
e-clips.
» Push buttons look similar but vary in length. Remove and re-
install one push button at a time
Control Shafts
In the unlikely event one of the control shafts sticks or becomes
difficult to operate, you may remove the control from the housing and
lubricate it, or return the housing to Ikelite for maintenance.
1. The set screw may be covered by a vinyl sleeve. If so, remove the
vinyl sleeve first to reveal the set screw.