Ikelite 200DL, Руководство пользователя

Страница: 13 / 32

13
5. Line the Mounting Screw up with the Camera Tripod Socket. Use a
coin or flat head screwdriver to tighten the mounting plate to the
camera.
Mounting Screw Camera Tripod Socket
Mounting Plate
Side
Front
6. Pull out on the housing control knobs to move them out of the way.
7. Insert the mounting plate into the slot on the inside bottom of the
housing. Push the camera all of the way forward until the back of
the mounting plate is flush with the back of the housing mount.
Attaching the Hotshoe
Your Ikelite housing features a factory installed Hotshoe connector
which allows manual flash with Ikelite and non-Ikelite strobes which
feature an electrical bulkhead connection for a sync cord.
The standard Hotshoe provides manual flash exposure, meaning
you must set the power level of your external strobe manually. An
“optional” TTL conversion circuit is available; see pages 20-21.
1. Orient the Hotshoe with the arrow on top pointing towards the front
of the camera.
2. Slide Hotshoe into camera Hotshoe Mount until it stops.