Ikegami VFL201A, Руководство по эксплуатации

Страница: 27 / 42

E-17
* Setting [NOISESUP] on a FUNCTION switch will enable
switching of the Coring Level between
“
0
”
and
“
9
”
.
* When the peaking color is set to a color other than “White” in
⑨
, the NOISE SUP function does not work. The characteristic
becomes the same as the set value “0”.
⑥
COLOR PEAKING
The color for peaking can be selected among “White”, “Yellow”,
“Green”, “Red”, and “Blue”.
The default value is “White”.
* Functions and characteristic of the peaking color is limited by
colors.
・
In case the color is “White”, the variable peaking amount be-
comes 128 tones. In case of other colors, it becomes 64 tones.
The minimum and maximum values are the same.
・
When the color is other than “White”, the
④
NOISE SUP
function does not work.
⑦
ZOOM UP PEAKING
When Peaking is
“
ON
”
, the ON/OFF setting for the function of
varying the Peaking amount in conjunction with the zoom posi-
tion of the camera is carried out here.
The default value is
“
OFF
”
.
*Setting [ZM-PEAK] on a FUNCTION switch will enable
ON/OFF switchover of ZOOM UP PEAKING.
⑧
ZOOM UP PEAK-MAX
When ZOOM UP PEAKING is “ON”, you can set the value of
the peaking amount in the Tele-end side from the setting value
in
⑨
to “100”.
The default value is “100”.
⑨
ZOOM UP PEAK-MIN
When ZOOM UP PEAKING is ON, you can set the value of the
peaking amount in Wide-end side from “0” to the setting value
in
⑧
.
The default value is “0”.
Tele-end-side
Wide-end-side
The peaking amount
becomes the setting value of
(6) ZOOMUP PEAK-MAX.
The peaking amount
becomes the setting value of
(7) ZOOMUP PEAK-MIN.
Zoom position
The peaking amount be-
comes the setting value of
⑦
ZOOM UP PEAK-MAX.
The peaking amount be-
comes the setting value of
⑧
ZOOM UP PEAK-MIN.