Ikegami RM-71F, Руководство по эксплуатации

Страница: 28 / 38

17
1. Select "ADJUST MODE" under the panel configuration menu.
2. On the character indicator, "POS1" is indicated at the upper section and "POS2"
at the lower section.
3.
Align the IRIS position to the OPEN end and press the rotary switch.
("POS1" indicated at the upper section of the character indicator changes to "OK.")
4. Align the IRIS position to the CLOSE end and press the rotary switch.
("POS2" indicated at the lower section of the character indicator changes to "OK.")
5. Two seconds after both upper and lower sections of the character indicator
indicate "OK," the upper section changes to "EXE?" and the lower section changes
to "NO" on the indicator.
>,5,6$'-86723(1&/26( 崯嵤崧崣崫崰 @
ن
IRIS ADJUST Screen
ه
ඨ৯਀ં
঱஺؟ 23(1 崯嵤崧
ق 326,7,21 崯嵤崧ڭك
ৣ஺؟ &/26( 崯嵤崧
ق 326,7,21 崯嵤崧ڮك
౒ৣඝ੿؟ ,5,6 峘 23(1&/26(
嵅崠崟嵏嵛峼ৠ৒峃峵
,5,6 峘 23(1&/26(
嵅崠崟嵏嵛峼ৠ৒峃峵
ඨ৯਀ં
঱஺؟ (;("
ৣ஺؟ 12<(6
৚ૡඝ੿؟ 12<(6 ৭උ峼ষ岰
౒ৣඝ੿؟崊嵛崝嵤ৠ৒
Item indication
Upper section: OPEN data
(POSITION DATA1)
Lower section: CLOSE data
(POSITION DATA2)
[IRIS ADJUST OPEN/CLOSE Data Set]
Pressing operation:
Confirm the IRIS
OPEN/CLOSE position
The IRIS OPEN/CLOSE
Positions are set.
Item indication
Upper section: EXE?
Lower section: NO/YES
Rotating: Selection of NO/YES
Pressing: Push set to enter