Ikegami MKC-300HD, Руководство по эксплуатации

Страница: 17 / 35

13
■
Setting Auto White Balance
Usually, MKC-300HD can be operated immediately after turning the power switch
on. Therefore, any other operations are unnecessary.
However, when using MKC-300HD for the first time, or when the light source has
been changed, Auto White Balance setting is required.
<Operation>
Auto White Balance Switch
① Shoot a white photographic object on the screen largely. Set the picture level to
such a degree that the white photographic object is not excessively bright, and press
AWB button.
②
“Auto White Balance” appears on the monitor screen. When auto white balance
is finished, “OK” appears.
Auto White Balance
Auto White Balance
= O K =
When the video level is low, "Too Dark" appears.
If Auto White Balance is "NG", check the video level etc. and then press
the white balance switch again.
DN-
27466