Ikegami ISD-A15S, Инструкция по эксплуатации

Страница: 14 / 46

E-9
①
HLC
It is a function to increase the visibility of the surrounding area by
using a mask when a light source exists in the video.
②
BLC
It is a blacklight correcting function.
(5) WHITE BAL
Setting a white balance is available.
①
ATW
It is a setting that automatically
judge the condition of playing video
and conducts adjustments. Pressing
the E button here opens the right-
side window.
・
ENVIRONMENT
INDOOR
･･･
ATW mode suitable for indoor installation
OUTDOOR
･･･
ATW mode suitable for outdoor installation
AUTO
･･･
The camera automatically determines if it is indoor or
outdoor.
・
SPEED
It decides the speed necessary for white balance adjustment.
・
DELAY CNT
It sets the standby time for readjustment of white balance when
switching takes place. The condition is more stable as the number
becomes larger. However, the reaction speed decreases.
②
PUSH
It draws any colors.
The colors may look light depending on subjects.
③
USER1
Manual fixed white balance 1
④
USER2
Manual fixed white balance 2
⑤
MANUAL
Adjust by moving the position to the left and the right. The left side
increases blue, and the right side increases red.
⑥
PUSH LOCK
Set the white balance from the subject you are shooting. If the light
source is changed after this setting, color deviation can occur.
(6) LENS
Setting that corresponds to the attached lens is available.
①
DC
Use it in case of the DC iris lens.
ＷＨＩＴＥ ＢＡＬ
ＥＮＶＩＲＯＮＭＥＮＴ ＩＮＤＯＯＲ
ＳＰＥＥＤ １５０
ＤＥＬＡＹ ＣＮＴ ００１
ＲＥＴＵＲＮ ↵