Ikegami ICD-48, Руководство пользователя, Страница: 7 / 30

E-5
5. Setting
5-1. User setting
On this camera, user can make settings of picture quality, synchronization, identification
etc. by himself or herself.
The setup menu is formed in a tree view, and the picture sharpness, synchronization, ID
and others can be set up by on-screen characters. (See the setup tree given in the end
of this manual.)
5-2. Setting switches and their functions
On the back of the camera there are the pushbutton switches and
display as shown at the left.
UP switch (U):
Setting item selection (up)
DOWN switch (D):Setting item selection (down)
RIGHT switch (R): Setting change and setting item selection (right)
LEFT switch (L):
Setting change and setting item selection (left)
ENTER (E): Setting mode call on/off, setting entry
* To enter into the setup mode, keep pressing the E button.
5-3. User setting menus
(1)CAMERA ID Up to 16 characters can be accepted and displayed.
Switching on and off the CAMERA ID function and presetting ID code
characters.
(2)SHUTTER Setting of high-speed electronic shutter
Selection of high-speed shutter, display of the screen at VARIABLE
mode
(3)LIGHT CONT. Selection of AES or auto iris lens
Setting of back-light compensation as sub-menu
(4)GAIN Selection of AGC, HYP-AGC and fix
(5)SYNC Selection of synchronization system (INT, LL)
(It is impossible to select LL when the power is not synchronous.)
GENLOCK is selected automatically.
(GENLOCK is not displayed without external sync signal.)
It is possible to adjust the phase on sub-menu.
(6)MENU LOCK Setting procedure is locked. (Unlocking: U → R → D → L → U → D → E)
●
Setting Indications and functions common on the setting menu
(1)EXIT Ending (Saving) the setting mode and returning to the regular display.
(2)CANCEL Recalling the previously saved settings.
(3)RESET Recalling the factory-settings.
(4)RET Returning to the preceding setting menu.
Select one of these indications and press the E switch.
U
SET UP
D
E
L R